Blog

Blog about AI in industrial automation: what AI can do for automation engineers, what it delivers, and where it goes wrong.

Posts about AI in automation engineering: what it can do, what it delivers and where it goes wrong. No hype, no doom. From engineer to engineer.

Every post shows up here on its day.

Do not want to miss a post? Follow Ivan Verdonck on LinkedIn.

Post 4 · 12 November 2026

Two paths into your project

Two paths into your project

There are two paths into your PLC project.

On the first, an assistant makes a proposal. You see exactly what would change, line by line, and you decide. On the second, an agent carries the change out, and you read about it afterwards.

Both can be right. A project that does not run yet can take the second path. A plant that has been producing for years, I would send down the first.

One flipped condition, an AND that becomes an OR, reads fine and can stop a line. You only catch it when you look at the difference, not at the result.

Which path does your team take today? And does anybody check the difference before it goes in?

#IndustrialAI #PLC

Post 3 · 10 November 2026

Agent or assistant

Agent or assistant

An assistant proposes. An agent executes.

In 2026 that difference matters, because the big vendors no longer let AI only read along; they let it carry out tasks inside the engineering environment.

For a project that does not run yet, that can be fine. For a plant that has been producing for years, I look at it differently.

For me the line is writing. Reading, searching and proposing: always. A change in the project: only after I have seen the difference myself.

Where do you draw the line?

#IndustrialAI #PLC

Post 2 · 5 November 2026

The block nobody dares to open

The block nobody dares to open

Every plant has one block that nobody dares to open.

It has run for years. The comments are missing or wrong. The person who wrote it has left. So everyone works around it, until the day the machine has to change.

Try this: pick that block and explain it in a few sentences, without looking at the comments.

This is where I think AI can help first, and it is the safest place to start: as a reading partner. It reads the block, tells you what it does network by network and shows where it is used. It changes nothing. You check its explanation against what you know. Where it is wrong, you learn something. Where it is right, you saved yourself a lot of digging.

Do you have a block like this in your plant? And what would you want as the result: a short explanation, comments in the networks, or a document for the engineer or the end user?

#IndustrialAI #PLC

Post 1 · 3 November 2026

AI in industrial automation: hype or real help?

AI in industrial automation: hype or real help?

AI in industrial automation: hype or real help?

Everybody has an opinion. One person says AI will soon program your PLC. The other says not a single line of AI code will ever enter his machine.

The truth is somewhere in the middle, and that is what we will look for over the next four weeks. Two posts a week about:

  • what AI can already do today in engineering and on the shop floor
  • what it really delivers
  • the risks nobody likes to talk about
  • the pitfalls when you introduce it

No hype, no doom. From engineer to engineer.

Where do you stand today: do you already use AI in your automation work, or do you stay away from it on purpose?

Follow iv-automation so you do not miss a post.

#IndustrialAI #Automation #PLC #Engineering